WASPcam Action Sport Camera Mounts


Adhesive Ball Head T-tip


Part #9930
Attach a WASPcam to flat surfaces with adhesive ball head T-tip. A versatile mount that’s capable of delivering just the right angle for your next shot.

Ball Head T-tip with Suction Cup


Part #9931
By using this industrial strength suction cup mount, you can safely attach your WASPcam to vehicles, boats, motorcycles, and more!

Swivel Camera Tip with Suction Cup


Part #9932
Go 360-degrees with this Suction Cup mount. Works great with vehicles, boats, motorcycles, and more!

Bike Mount

Part #9936
Attaches WASPcam securely to a bicycle, motorcycle or ATV handlebar.
T-tip for General Mounts (compatible with GoPro mounts)

Part #9935
Attach to WASPcam to utilize GoPro mounting systems.


Rail Mount


Part #9937
Designed for the outdoorsman, this mount fits a WASPcam snugly to rifles, shotguns and pistols.

Telescope Mount


Part #9938
A great device for mounting a WASPcam to your roll bars, tubes and more.

Vented Head Mount


Part #9933
A fully adjustable helmet mounting system, great for bicycle riders, rock climbers or others wearing a helmet.

Chest Mount


Part #9934
Makes it easy to capture immersive video footage from your chest or back. Perfect for skiing, snowboarding, mountain biking, motocross, paddle sport, or any activity where you want to get deep down into the action.

Curved Adhesive Mount


Part #9950
Keep a WASPcam stuck in place with a Curved Adhesive Socket. This mount works great for mounting onto surfaces with slight curves, such as a motorcycle, bicycle or snowboarding helmet. Once stuck in place, it’s there for life! Well, it comes off but it’s ready to endure the roughest conditions. Every WASPcam 9900/ 9901 Action Sports Camera package includes a Curved Adhesive Mount.

Flat Adhesive Mount


Part #9951
For flat surfaces, the Flat Adhesive Mount works great and holds in place firmly with 3M sticky materials. Adhesive may be replaced.

Aluminum Billet Clamp (7/8″)


Part #9965
When things get tough, the tough get Billet! This titanium anodized aluminum clamp fits snugly onto 7/8” tubing. (Requires “GoPro adaptor” #9935 or #9973 to attach to WASPcam camera.)

Aluminum Billet Clamp (1″)


Part #9966
A Titanium anodized aluminum clamp designed to fit on 1″ tubing. (Requires “GoPro adaptor” #9935 or #9973 to attach to WASPcam camera.)

Aluminum Billet Clamp (1 1/8″)


Part #9967
A Titanium anodized aluminum clamp designed to fit on 1 1/8” tubing. (Requires “GoPro adaptor” #9935 or #9973 to attach to WASPcam camera.)

Aluminum Billet Clamp (1 ¼”)




Part #9968
A Titanium anodized aluminum clamp designed to fit on 1 ¼” tubing. (Requires “GoPro adaptor” #9935 or #9973 to attach to WASPcam camera.)

Aluminum Billet Clamp (1 ½”)


Part #9969
A Titanium anodized aluminum clamp designed to fit on 11/2” tubing. (Requires “GoPro adaptor” #9935 or #9973 to attach to WASPcam camera.)

Aluminum Billet Clamp (1 3/4”)


Part #9970
A Titanium anodized aluminum clamp designed to fit on 1 3/4” tubing. (Requires “GoPro adaptor” #9935 or #9973 to attach to WASPcam camera.)


Aluminum Billet Clamp (2”)


Part #9971
A Titanium anodized aluminum clamp designed to fit on 2” tubing. (Requires “GoPro adaptor” #9935 or #9973 to attach to WASPcam camera.)


Aluminum Billet Camera Mount (GoPro Adaptor)


Part #9972
An aluminum mount designed to fit a WASPcam with WASPcam and GoPro mounting systems.

Aluminum Billet Custom Mount Screw


Part #9973
A durable, aluminum mounting screw designed to fit with various WASPcam billet aluminum mounting systems. A 10mm nut-head ensures a snug fit every time! (Requires “GoPro adaptor” #9935 or #9973 to attach to WASPcam camera.)

WASPcam Stubby


Part #9975
This sleek, lightweight and durable carbon-fibre wrapped “stubby” pole attaches directly to a WASPcam, allowing for excellent handheld control of the camera. An great tool for users who are trying to capture that perfect ‘selfie!’ Included with every Stubby is a short tether strap, designed to wrap-around a user’s wrist, offering added security in case things get a little rough on the road, trail or slopes.Requires mount #9935 or 9972 to connect with WASPcam camera casing.

WASPcam Extending Pole Mount


Part #9976
Get deep into the action, without getting run over by the action, by using a WASPcam Extending-Pole-Mount. Pole extends from 12” to 26.5” inches (roughly). Also includes handle-grip and wireless wrist remote holder. Made from lightweight aluminum for extra durability.Requires mount #9935 or 9972 to connect with WASPcam camera casing.

WASPcam Extreme Backpack


Part #9977
This backpack includes a 14” aluminum pole mount, which attaches inside the pack, and may be twisted or bent to capture a variety of camera angles. Front, back, side or overhead, the choice is yours. The pole mount construction is unique; even though it’s flexible, the mount doesn’t lose its shape even during the roughest rides. Excellent accessory for snowboarding, skiing, hiking, cycling, motorcycles, ATVs, fishing, hunting … this really is one of the most versatile action-cam accessories available! Requires mount #9935 or 9972 to connect with WASPcam camera casing.
JAKD Chest Strap Mount


Part #9981
An excellent mounting system for any sport or activity, the JAKD chest mount captures an immersive and interesting perspective of wide-angle action. Easily adjustable, the Chest Mount fits youth and adults alike.
JAKD Head Strap Mount


Part #9982
This adjustable head and/ or helmet mount system delivers an excellent POV perspective, which may be tiled up or down to achieve the desired angle. Mounts quickly and locks firmly in place with a nut and bolt system.
JAKD Surfboard Mount


Part #9983
Ideal for solid flat surfaces, the Surfboard Mount works great on surfboards, snowboards or anywhere else you can find a place to stick it. A durable, tacky 3M sticky pad keeps it in place, no matter how rough things can get.
JAKD Basic Buckle Mount


Part #9984
Compatible with JAKD, GoPro and WASPcam mounts #9935/ 9972, the Basic Buckle Mount comes with every JAKD camera package sold and fits snugly into mounts #9987, 9979 and 9983.
JAKD J-Hook Buckle


Part #9985
Compatible with JAKD, GoPro and WASPcam #9935/ 9972, the J-Hook is included with every JAKD camera sold and fits with mounts #9987, 9979 and 9983. Compared to the Basic Buckle Mount, the J-Hook offers additional height for a different angle/ perspective.
JAKD Tripod Mount


Part #9986
Allows user to attach JAKD camera to a standard tripod.
JAKD Tripod Mount Adaptor


Part #9987
Included with every JAKD camera package. Connects camera to various JAKD mounting and GoPro mounting systems (also with WASPcam #9935/ 9972). Also compatible with many WASPcam billet aluminum mounts, Stubby Pole and Extending Pole Mount.
JAKD Straight Joint Mount


Part #9988
A straight-line connection for creating additional height or angles with various JAKD, GoPro and select WASPcam mounts.
JAKD Bicycle Handlebar Mount


Part #9989
An adjustable handlebar/ tube mount that works well on bicycles, motorcycles, or ATVs. Includes rubber padding to keep mount firmly in place. This mount is included with every JAKD camera package, but may be purchased separately.
JAKD Velcro Helmet Mount


Part #9979
An ideal mounting system for attaching a WASPcam JAKD camera to a bicycle helmet. Included with JAKD camera package, but may be purchased separately as well. Mount and Velcro Strap sold together.
Flex Rod 6″ Billet Aluminum Connector


Part #9991
To be mounted and screwed into the Extreme Backpack (#9977), this 6″ aluminum connector features a unique design, in that it can be bent into a shape/ angle but never loses it’s shape, even during the roughest rides. Fits with WASPcam mounts 9935/ 9972, and JAKD and GoPro mounts as well.
Flex Rod 10″ Billet Aluminum Connector


Part #9992
To be mounted and screwed into the Extreme Backpack (#9977), this 10″ aluminum connector features a unique design, in that it can be bent into a shape/ angle but never loses it’s shape, even during the roughest rides. Fits with WASPcam mounts 9935/ 9972, and JAKD and GoPro mounts as well.
Flex Rod 14″ Billet Aluminum Connector


Part #9993
To be mounted and screwed into the Extreme Backpack (#9977), this 14″ aluminum connector features a unique design, in that it can be bent into a shape/ angle but never loses it’s shape, even during the roughest rides. Fits with WASPcam mounts 9935/ 9972, and JAKD and GoPro mounts as well.
Flex Rod 20″ Billet Aluminum Connector


Part #9993
To be mounted and screwed into the Extreme Backpack (#9977), this 20″ aluminum connector features a unique design, in that it can be bent into a shape/ angle but never loses it’s shape, even during the roughest rides. Fits with WASPcam mounts 9935/ 9972, and JAKD and GoPro mounts as well.